First Test

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

First Test

Post by Ronny » 04 Jan 2017, 23:23

Hello,

1. Weather Panel dos`nt work

2. Landing Gear switch is "down" Gear is "up"

3. Trimwheel dreht falsche Richtung

LG Ronny

User avatar
Hanne
Beheerder
Posts: 1275
Joined: 17 Dec 2010, 14:42
Location: Delft
Contact:

Re: First Test

Post by Hanne » 07 Jan 2017, 07:13

Hi Ronny,

No double posts please, I've removed your duplicate.

Thanks for your feedback, we'll look into this. With FSCockpit we've discussed that they'll send us a bunch of components for interfacing within two weeks, one of them is the weather panel. For a whole lot of other inputs and outputs we'll have to create "inverse" checkboxes as they seem to have been wired randomly from one unit to the other...

Best, Hanne

User avatar
dvincent
Posts: 4298
Joined: 14 Jun 2011, 11:21
Location: Nederland - Vlissingen
Contact:

Re: First Test

Post by dvincent » 07 Jan 2017, 19:44

It might be a wise idea to limit native support to "certified" hardware.
Regards,
Dirk

Image

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

Re: First Test

Post by Ronny » 07 Jan 2017, 21:32

thanks Hanne and Dirk for the Service

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

Re: First Test

Post by Ronny » 11 Jan 2017, 08:30

Hello Hanne,

the Brightness control for PFD/ND is Exchanged ;-)

nice Regards Ronny

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

Re: First Test

Post by Ronny » 20 Feb 2017, 14:20

Hello,

thanks for Update ;)

The WX Panel works very fine. Thanks for this

5 little Problems :

1. the APU Master Switch, the "ON" LED dosn`t work

2. TERR ON ND Switch and LED dosn`t work

3.the Brightness control for PFD/ND is Exchanged

4. the TrimWheel Servo ist exchanged, the ECAM ist +1.0 UP the TrimWheel is -1.0 DN

5. the Gear Lever ist exchanged Gear up and down

Thanks for the hard work

Best Regards Ronny

FlightOnFly
Posts: 3
Joined: 21 Feb 2017, 14:02

Re: First Test

Post by FlightOnFly » 21 Feb 2017, 14:03

In this week i ll start test also in my complete ovh and pedestal FSCOCKPIT ;-)

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

Re: First Test

Post by Ronny » 18 Mar 2017, 03:05

Ronny wrote:Hello,

thanks for Update ;)

The WX Panel works very fine. Thanks for this

5 little Problems :

1. the APU Master Switch, the "ON" LED dosn`t work

=> the LED works fine

2. TERR ON ND Switch and LED dosn`t work

=> TERR ON ND Switch works fine the LED works not !!

3.the Brightness control for PFD/ND is Exchanged

=> works fine :-)

4. the TrimWheel Servo ist exchanged, the ECAM ist +1.0 UP the TrimWheel is -1.0 DN

=> works fine :-)

5. the Gear Lever ist exchanged Gear up and down

=> works fine

thanks for you hard Works :-)

Best Regards Ronny

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

Re: First Test

Post by Ronny » 18 Mar 2017, 03:09

Ronny wrote:
Ronny wrote:Hello,

thanks for Update ;)

The WX Panel works very fine. Thanks for this

5 little Problems :

1. the APU Master Switch, the "ON" LED d

=> the LED works fine

2. TERR ON ND Switch and LED dosn`t work

=> TERR ON ND Switch works fine the LED works not

3.the Brightness control for PFD/ND is Exchanged

=> works fine :-)

4. the TrimWheel Servo ist exchanged, the ECAM ist +1.0 UP the TrimWheel is -1.0 DN

=> works fine :-)

5. the Gear Lever ist exchanged Gear up and down

=> works fine

thanks for you hard Works :-)

Best Regards Ronny

Ronny
Posts: 88
Joined: 02 Jan 2017, 21:30

Re: First Test

Post by Ronny » 18 Mar 2017, 03:13

I have pay the Full Version of the Software

The Aircraft have the Liverie for BA

How can i take the liverie for the Lufthansa D-AIPK create .???

i have the Liverie from Project Airbus can i this ???

Regards Ronny

Post Reply

Return to “FsCockpit”