ProSim737 version 2.18

Announcements by the ProSim-AR team
Locked
User avatar
martin.vsetecka
Posts: 124
Joined: 01 Aug 2016, 16:47

ProSim737 version 2.18

Post by martin.vsetecka » 23 May 2019, 12:45

May 23 2019 Release Version 2.18
======================================
System:
- [CAPA738-94] Added 10 seconds transient protection to FMCs
- [CAPA738-95] Fixed font size on RNP page footer
- [CAPA738-95] Added possibility to update RNP value from LEGS page
- [CAPA738-82] Added thrust lever split monitor
- [CAPA738-82][CAPA738-54] Fixed autopilot disconnect warning not triggering/cancelling in certain conditions
- [CAPA738-82] Improved Secondary Engine Display pop up
- [CAPA738-22] Fixed EDP Low pressure indication
- [PAR-2368] Fixed year not correctly placed on chrono
- Fixed FMS reset not resetting RNP manual values
- Fixed VRNP/VANP values not limited to a range
- [CAPA738-64] Fixed RNP user value per phase and not global
- Improved VERIFY RNP VALUE and VERIFY RNP VERT VALUE messages
- Fixed RNP user value not possible to delete
- [PAR-2361] Fixed chimes playing even when no power is available
- Fixed called channel not resetting in case of power loss
- [CAPA738-64] Improved VANP calculation
- Added reverser sync lock gates

Drivers:
- Fixed FSUIPC driver crash if lever assigned without calibration points
- [PAR-1918] Fixed FDS MCP G3 encoder issue
- Fixed null exception in FSUIPC driver
- Improved levers handling on FSUIPC driver
- Fixed SDK priority mode conflicting with SDK driver
- Added new pressurization panel to SISMO driver (with ALPS encoders)
- [PAR-1476] Fixed FDS transponder set to 0 when switching AC power source
- Fixed FMC switch mapping on CPFlight driver

Misc:
- Improved aircraft.gearInTransit dataref
- Improved position freeze
- Added new SDK dataref aircraft.gearDown
- Fix increased System and MCP CPU load after the freeze fix
- Fixed config options accidentally changing when scrolling combined config window with mouse wheel
- Updated terrain data (DEM) location to a common folder (ProgramData/ProSim-AR/DEM)
When starting ProSim and the DEM is found in the old location, ProSim will automatically move the data to the new location.
This will allow different ProSim instances without the need to have terrain data installed in all of them
- Moved database folder to a common folder (ProgramData/ProSim-AR/Database)
When starting ProSim and the database folder is found in the old location, ProSim will automatically move the data to the new location.
This will allow different ProSim instances without the need to have database data installed in all of them
Martin Vsetecka
ProSim Support

Locked

Return to “ProSim737 announcements”