WX test Image issues

Ursli80
Posts: 743
Joined: 05 Apr 2015, 15:33
Location: LSZH

Re: WX test Image issues

Post by Ursli80 » 11 Feb 2019, 16:57

Hello,

I have new prosim system running on my P3D PC. I was hoping to fix this and other "problems". Unfortunately without success. Therefore, the WX test image problem still exists.

Best regards
Urs
P3D V4.4
Win 10
MCP/EFIS Pedestal (CP Flight)
MIP, AFT OVHT (SISMO)
TQ V3 Gold Plus ( CFY)
FWD OVHT, Pedalen and Yoke (Opencockpits)
Tiller (Schiller Metalle)

Image

vjeanmarc
Posts: 249
Joined: 26 Oct 2014, 08:09
Location: Pompiac - 17 NM LFBO

Re: WX test Image issues

Post by vjeanmarc » 11 Feb 2019, 17:02

I also had this problem during the test before the flight yesterday (v2.14 Official). :cry:
Regards,
Jean-Marc

Google Translate

User avatar
wpslider
Posts: 4362
Joined: 06 Feb 2013, 18:38
Location: Faro - PT
Contact:

Re: WX test Image issues

Post by wpslider » 11 Feb 2019, 17:49

2.14 should be ok with wxr test. Or at least different now. Can you elaborate what exactly is happening?
Humberto Miguel
Image

vjeanmarc
Posts: 249
Joined: 26 Oct 2014, 08:09
Location: Pompiac - 17 NM LFBO

Re: WX test Image issues

Post by vjeanmarc » 11 Feb 2019, 18:23

Hello Humberto,

I received this break as in the picture during the test.
Attachments
Radar Image.jpg
Regards,
Jean-Marc

Google Translate

User avatar
wpslider
Posts: 4362
Joined: 06 Feb 2013, 18:38
Location: Faro - PT
Contact:

Re: WX test Image issues

Post by wpslider » 11 Feb 2019, 18:28

vjeanmarc wrote:
11 Feb 2019, 18:23
Hello Humberto,

I received this break as in the picture during the test.
Does it happen all the time? or just sometimes?
Humberto Miguel
Image

vjeanmarc
Posts: 249
Joined: 26 Oct 2014, 08:09
Location: Pompiac - 17 NM LFBO

Re: WX test Image issues

Post by vjeanmarc » 11 Feb 2019, 19:05

wpslider wrote:
11 Feb 2019, 18:28
vjeanmarc wrote:
11 Feb 2019, 18:23
Hello Humberto,

I received this break as in the picture during the test.
Does it happen all the time? or just sometimes?
For the moment I only had it once during my last flight.
I have not done it since. I would do a test tomorrow
Regards,
Jean-Marc

Google Translate

Ursli80
Posts: 743
Joined: 05 Apr 2015, 15:33
Location: LSZH

Re: WX test Image issues

Post by Ursli80 » 11 Feb 2019, 19:40

wpslider wrote:
11 Feb 2019, 18:28

Does it happen all the time? or just sometimes?
Hello Humberto,

unfortunately I have not been able to take a picture, but I'm after this.

For me it is all the time so that my picture looks like this from vjeanmarc or today. Since I had only left and right each a small Streiffen of about 8mm where I have been shown.

This problem, but I have been synonymous for a very long time and I'm on 2.14 no beta version.

Best regards
Urs
P3D V4.4
Win 10
MCP/EFIS Pedestal (CP Flight)
MIP, AFT OVHT (SISMO)
TQ V3 Gold Plus ( CFY)
FWD OVHT, Pedalen and Yoke (Opencockpits)
Tiller (Schiller Metalle)

Image

vjeanmarc
Posts: 249
Joined: 26 Oct 2014, 08:09
Location: Pompiac - 17 NM LFBO

Re: WX test Image issues

Post by vjeanmarc » 12 Feb 2019, 08:55

wpslider wrote:
11 Feb 2019, 18:28
vjeanmarc wrote:
11 Feb 2019, 18:23
Hello Humberto,

I received this break as in the picture during the test.
Does it happen all the time? or just sometimes?
Hello Humberto,

I repeated the tests several times this morning, I did not encounter the problem this time.
Regards,
Jean-Marc

Google Translate

Saldo
Posts: 660
Joined: 11 Dec 2014, 07:17
Location: Gorinchem, The Netherlands

Re: WX test Image issues

Post by Saldo » 12 Feb 2019, 10:37

Here I am getting an onscreen error with the test.

Wrx when flying does work although I sometimes only see little green spots while there is an OC and raining cats and dogs...

CpFlight hardware..
Regards,

Gerard

Ursli80
Posts: 743
Joined: 05 Apr 2015, 15:33
Location: LSZH

Re: WX test Image issues

Post by Ursli80 » 16 Feb 2019, 15:29

Hello Humberto,

and here is a video about my WX test today.

Best regards
Urs

https://www.mycloud.ch/l/L00CF4D3983B10 ... CEA913E36E
P3D V4.4
Win 10
MCP/EFIS Pedestal (CP Flight)
MIP, AFT OVHT (SISMO)
TQ V3 Gold Plus ( CFY)
FWD OVHT, Pedalen and Yoke (Opencockpits)
Tiller (Schiller Metalle)

Image

Post Reply

Return to “ProSim737 - Pre-releases”