ProSimA320 version 1.21

Announcements by the ProSim-AR team
Locked
User avatar
martin.vsetecka
Posts: 104
Joined: 01 Aug 2016, 16:47

ProSimA320 version 1.21

Post by martin.vsetecka » 15 Mar 2019, 20:48

March 15 2019 Release version 1.21
==================================
NOTE: Requires .NET Version 4.7.2 or newer!

FMS:
– Improvements in takeoff trim setting making rotation with normal trim settings more realistic
– Improved FBW roll response
– Also auto tune ILS for LOC approaches
– Fixed oscillating modes when engine fails during VNAV cruise flight
– Do not select missed approach legs as targets for stringing star transition to approach

Displays:
– Make sure N1 gauge reaches minimum value when the engine is off
– Fixed pedestal XPDR display references incorrect data

Systems:
– GPWS TERR and CAT 2 INOP when dual FCU fails
– Fixes for STS page during IR faults
– A/THR failure split into A/THR 1 and 2
– Removed IRS total failure and added “IR failure”, which only fails ATT + POS

Hardware:
– Fixed FSCockpit triple gauge has an incorrect range for accu pressure

Misc:
– Added terrain ahead pullup sound
– Make sure radios provide no signal if no request for any frequency is available
– Reset FMS after landing now also applied to resetting after failure
– Fixed incorrect data for engine values after engine start

MCDU:
– Fixed various issues with return to SEC FPLN
Martin Vsetecka
ProSim Support

Locked

Return to “ProSimA320 announcements”